Identifying and definitional attributes  
Metadata item type:  Indicator 

Indicator type:  Indicator 
Short name:  PI 09—Antenatal care, 2017 
METeOR identifier:  645400 
Registration status:  Indigenous, Archived 06/06/2017 
Description:  There are two measures for this indicator, both to be reported by Indigenous status: a) Number of women who gave birth, where an antenatal visit was reported in the first trimester, as a proportion of women who gave birth. b) Number of women who gave birth, where five or more antenatal visits were reported, as a proportion of women who gave birth. 
Rationale:  The primary care needs of all Australians are met effectively through timely and quality care in the community. Good antenatal care is associated with positive health outcomes for mothers and babies. 
Indicator set:  National Indigenous Reform Agreement (2017) Indigenous, Archived 06/06/2017 
Outcome area:  Indigenous children are born and remain healthy Indigenous, Endorsed 21/07/2010 
Quality statement:  National Indigenous Reform Agreement: PI 09Antenatal care, 201516; Quality Statement Indigenous, Archived 07/02/2018 
Collection and usage attributes  
Computation description:  Crude rates are calculated for Indigenous Australians. Agestandardised rates are calculated for Indigenous and nonIndigenous Australians. Rate ratios and rate differences are calculated for comparisons between Indigenous and nonIndigenous Australians (using agestandardised rates). For variability bands: Variability bands are to be calculated for rates using the standard method (see definition below). For trends: Percentage change and statistical significance of change is to be calculated (required for reporting of progress over time). Presentation: Number, rate per 100 women who gave birth (percentage), rate ratios, rate differences and variability bands. First trimester is defined as up to and including 13 weeks of pregnancy. Analysis by state/territory and remoteness is based on the usual residence of the mother. Data exclude Australian nonresidents, residents of external territories and records where state/territory of residence was not stated. Definitions: Standard method for variability band computation: Rates derived from administrative data counts are not subject to sampling error but may still be subject to natural random variation, especially for small counts. A 95% confidence interval for an estimate is a range of values which is very likely (95 times out of 100) to contain the true unknown value. Where the 95% confidence intervals of two estimates do not overlap it can be concluded that there is a statistically significant difference between the two estimates. This is the standard method used in Australian Institute of Health and Welfare (AIHW) publications for which formulas can be sourced from Breslow and Day (1987) in the publication ‘Statistical methods in cancer research’. Typically in the standard method, the observed rate is assumed to have natural variability in the numerator count (for example, deaths, hospital visits) but not in the population denominator count. Also, the rate is assumed to have been generated from a normal distribution ("Bell curve"). Random variation in the numerator count is assumed to be centred around the true value, that is, there is no systematic bias. 
Computation:  Crude rate: 100 x (Numerator ÷ Denominator). Agestandardised rate: calculated using the direct method, using fiveyear age groups from 15–19 years to 40–44 years with the 30 June 2001 Australian female estimated resident population (ERP) based on the 2001 Census as the standard population. Agestandardisation should be done in accordance with the NIRAPIMG agreed principles for direct agestandardisation (see Comments section. Note that Principle 4 is not applicable for this indicator). Rate ratio: Indigenous agestandardised rate divided by nonIndigenous agestandardised rate. Rate difference: Indigenous agestandardised rate minus nonIndigenous agestandardised rate . Variability band: to be calculated using the standard method for estimating 95% confidence intervals as follows: Crude rate: Where CI = confidence interval for either Measure 1a or Measure 1b CR = crude rate for either Measure 1a or Measure 1b n = crude rate denominator for either Measure 1a or Measure 1b. Agestandardised rate: Where CI = confidence interval for either Measure 1a or Measure 1b ASR = agestandardised rate for either Measure 1a or Measure 1b w_{i} = the proportion of the standard population in age group i d_{i} = the numerator for either Measure 1a or Measure 1b in age group i n_{i} = the denominator for either Measure 1a or Measure 1b respectively (see Denominator below) in the population in age group i. Percentage change: Calculated by multiplying the average annual change over the period by the number of data points less 1. This is then divided by the rate for the first year in the series and multiplied by 100. The average annual change in rates, rate ratios and rate differences are calculated using linear regression which uses the least squares method to calculate a straight line that best fits the data and returns an array that best describes the line. The simple linear regression line, Y = a + bX, ‘slope’ estimate (b) was used to determine the average annual change in the data over the period. The formula used to calculate the slope estimate and standard error of the slope in Microsoft Excel is: LINEST (known_y’s, known_x’s, true) entered as an array formula (Ctrl, Shift, Enter). Statistical significance of change: The 95% confidence intervals (CIs) for the standard error of the slope estimate (average annual change) are used to determine whether the apparent increases or decreases in the data are statistically significant at the p<0.05 level. The formula used to calculate the CIs for the standard error of the slope estimate is: 95% CI(x) = x ± 1.96 x SE(x) where x is the average annual change (slope estimate). If the upper and lower 95% confidence intervals do not include zero, then it can be concluded that there is statistical evidence of an increasing or decreasing trend in the data over the study period.

Numerator:  Measure 1a) number of women who gave birth where an antenatal visit was reported in the first trimester (up to and including 13 completed weeks), to at least one live or stillborn baby. Measure 1b) number of women who gave birth where five or more antenatal visits were reported for pregnancy of 32 or more weeks gestation, to at least one live or stillborn baby. 
Numerator data elements:  
Denominator:  Measure 1a) total number of women who gave birth to at least one live or stillborn baby (where gestation at first antenatal visit is known). Measure 1b) total number of women who gave birth at 32 weeks or more gestation to at least one live or stillborn baby (where number of antenatal visits is known). 
Denominator data elements:  
Disaggregation:  Current period—(2014): For Indigenous women only (number and crude rate):
Time series—2007, 2008, 2009, 2010, 2011, 2012, 2013 (the data for these years have been previously supplied), 2014 (required for 2017 reporting): For Indigenous and nonIndigenous women (number, agestandardised rate, rate ratio, rate difference and variability bands):

Disaggregation data elements:  
Comments:  Most recent data available for 2017 report (2015–16 reporting cycle) is 2014. The NPDC consists of an agreed set of standardised data items as specified in the Perinatal National Minimum Data Set (NMDS), as well as additional (nonstandardised) data items. There were no data elements in the Perinatal NMDS for antenatal care prior to July 2010. A standard data item for gestation at first presentation for antenatal care was developed and included in the Perinatal NMDS from 1 July 2010, while a standard data item for number of antenatal visits was developed and included in the Perinatal NMDS from 1 July 2013.
Data on gestation at first antenatal visit (for measure (a)) are only available to report for NSW, Qld, WA, SA, ACT and the NT for births from January 2010, and for Vic and Tas for births from 1 July 2010. Data on number of antenatal visits (for measure (b)) are only available to report for Qld, SA and the NT for births from January 2010, for NSW, Tas and the ACT from January 2011, and for WA from 1 July 2012. These data are not available from Victoria. For earlier years, data from nonstandard data items made available as part of the NPDC have been used; therefore these data should be interpreted with caution. Information is included in the NPDC for all live births and stillbirths of at least 400 grams birthweight or at least 20 weeks gestation. Maternal age is the age at the time of giving birth. To report trends, the body assessing progress over time may separately request percentage change and statistical significance testing for this indicator directly from the data provider (AIHW). Variability bands accompanying perinatal data should be used for the purposes of comparisons over time and for national estimates at a point in time for Indigenous/nonIndigenous comparisons. Baseline year for NIRA target (Halve the gap in mortality rates for Indigenous children under 5 within a decade) is 2008; baseline year for this indicator is 2007; target year is 2018. NIRAPIMG agreed Principles for reporting directly agestandardised rates for administrative data. Note that Principle 4 is not applicable for this indicator. Overarching principle: Before undertaking agestandardisation, analysts must investigate the data being used to understand the agespecific distribution and any limitations that may impact on the results. Principle 1: The standard population used should be the Australian estimated resident population as at 30 June 2001 based on the 2001 Census [for this indicator, this is limited to females aged 15–44 years]. Principle 2: If the denominator is less than 30 in any one age group, then do not attempt to produce agestandardised rates. Age groups may be collapsed to obtain a denominator of 30 or more (provided that this is in accordance with principle 3). Principle 3: If the total number of Indigenous events (for example, deaths, hospital separations) is less than 20, then do not attempt to produce agestandardised rates. Combining several years of data, or aggregating jurisdictions should be considered to obtain a total of 20 or more events. If this does not meet the purpose (that is, data are required for time series or jurisdictional comparisons), or does not result in a total of 20 or more events, then other measures and contextual information should be reported instead of agestandardised rates which could include total number of events, crude rates, agespecific rates, agespecific rate ratios and median age at death. Principle 4: Not applicable. Principle 5: Additional contextual information (most importantly agespecific rates and ratios) should be provided in addition to agestandardised rates when: a) the agestandardised rates and rate ratios lie largely outside the range of the agespecific rates and rate ratios. b) the pattern of agespecific rates of the Indigenous and nonIndigenous populations differ substantially (for example, deaths from a certain cause concentrate on younger ages for the Indigenous population while for the nonIndigenous population they may occur at older ages). c) the agespecific rates depart from the assumption of a uniform increase in death with age (for example, injury which peaks in the young adult to middleages and certain cancers amenable to treatment for some age groups). d) the condition of interest is largely confined to a specific age range (for example, sexually transmitted infections (STIs) and women who give birth). In such instances, agestandardisation could be restricted to include the age groups within this age range only. Principle 6: For conditions restricted to a specific age group (for example, conditions originating in the perinatal period and sudden infant death syndrome (SIDS)), it is recommended to report the agespecific rate for the age group of interest instead of the agestandardised rate. 
Representational attributes  
Representation class:  Percentage 
Data type:  Real 
Unit of measure:  Person 
Format:  NN[N].N 
Indicator conceptual framework  
Framework and dimensions:  Effective/Appropriate/Efficient 
Data source attributes  
Data sources:  
Accountability attributes  
Reporting requirements:  National Indigenous Reform Agreement. 
Organisation responsible for providing data:  Australian Institute of Health and Welfare. 
Source and reference attributes  
Steward:  National Indigenous Reform Agreement Performance Information Management Group 
Reference documents:  Breslow NE & Day NE 1987. Statistical methods in cancer research. Lyon: International Agency for Research on Cancer. 
Relational attributes  
Related metadata references:  Has been superseded by National Indigenous Reform Agreement: PI 09Antenatal care, 2018 Indigenous, Archived 31/07/2018 Supersedes National Indigenous Reform Agreement: PI 09—Antenatal care, 2016 Indigenous, Archived 01/07/2016 