Identifying and definitional attributes
|Metadata item type:||Quality Statement|
|Registration status:||Health, Standard 31/01/2017|
|Indicators linked to this Quality statement:|
National Healthcare Agreement: PI 12–Waiting times for GPs, 2017 Health, Superseded 30/01/2018
Data collector(s): The Patient Experience Survey is a topic on the Multipurpose Household Survey (MPHS). It is collected, processed, and published by the Australian Bureau of Statistics (ABS). The ABS operates within a framework of the Census and Statistics Act 1905 and the Australian Bureau of Statistics Act 1975. These ensure the independence and impartiality from political influence of the ABS, and the confidentiality of respondents.
For more information on the institutional environment of the ABS, including the legislative obligations of the ABS, financing and governance arrangements, and mechanisms for scrutiny of ABS operations, see ABS institutional environment.
Collection authority: The Census and Statistics Act 1905 and the Australian Bureau of Statistics Act 1975.
Data compiler(s): Data are compiled by the Health section of the ABS.
Statistical confidentiality is guaranteed under the Census and Statistics Act 1905 and the Australian Bureau of Statistics Act 1975. The ABS notifies the public through a note on the website when an error in data has been identified. The data are withdrawn, and the publication is re-released with the correct data. Key users are also notified where possible.
Collection interval/s: patient experience data are collected annually.
Data available: the 2015–16 data used for this indicator became available from 15 November 2016.
Reference period: July 2015 to June 2016.
There are not likely to be revisions to this data after their release.
Data are publicly available. Tables showing data on GPs are available in Health services: patient experiences in Australia, 2009 (ABS 2010) and the Patient experiences in Australia: summary of findings reports from 2010-11 to 2015–16 (ABS 2011, 2012, 2013a, 2014, 2105, 2016).
Data for this indicator are shown by age, sex, Socio-economic Indexes for Areas (SEIFA) and remoteness. Jurisdictional data is not currently publicly available but may be made available in the future.
Data are not available prior to public access.
Supplementary data are available. Additional data from the Patient Experience Survey are available upon request.
Access permission/restrictions: customised data requests may incur a charge.
Contact details: for more information, call the ABS National Information and Referral Service 1300 135 070.
Context: these data were collected from a representative sample of the Australian population and questions were asked in context of the year prior to the survey. The data were collected over a 12-month period and therefore should minimise any seasonality effects in the data.
Other supporting information: the ABS patient experience data are published in Patient experiences in Australia: summary of findings, 2015-16 (ABS 2016). This publication includes explanatory and technical notes.
Socioeconomic status definition: the SEIFA Index of Relative Socio-economic Disadvantage (IRSD) uses a broad definition of relative socio-economic disadvantage in terms of people's access to material and social resources, and their ability to participate in society. While SEIFA represents an average of all people living in an area, it does not represent the individual situation of each person. Larger areas are more likely to have greater diversity of people and households.
Socioeconomic status derivation: The 2011 SEIFA IRSD is derived from Census variables related to disadvantage, such as low income, low educational attainment, unemployment, and dwellings without motor vehicles.
Socioeconomic status deciles derivation: deciles are based on an equal number of areas. A score for a collection district (CD) is created by adding together the weighted characteristics of that CD. The scores for all CDs are then standardised to a distribution where the average equals 1000 and roughly two-thirds of the scores lie between 900 and 1100. The CDs are ranked in order of their score, from lowest to highest. Decile 1 contains the bottom 10% of CDs, decile 2 contains the next 10% of CDs and so on. Further information on SEIFA can be found in the ABS technical paper Socio-economic indexes for areas 2011 (ABS 2013b).
Any ambiguous or technical terms for the data are available from the technical note, glossary and explanatory notes in Patient experiences in Australia: Summary of Findings, 2015-16 (ABS 2016).
Level of geography: data are available by state/territory, sex, 2011 SEIFA IRSD and 2011 remoteness (Major cities, Inner and Outer regional, Remote and Very remote Australia).
Data completeness: all data are available for this indicator from this source.
Numerator/denominator source: same data source.
Data for this indicator was collected for all persons in Australia aged 15 years and over, excluding the following people:
The 2011–12 iteration of the Patient Experience Survey was the first to include households in Very remote areas (although it still excluded discrete indigenous communities). The 2015–16 iteration continues to include data from Very remote areas. The inclusion of Very remote areas will serve to improve the coverage of the estimates, particularly for the Northern Territory. Small differences evident in the Northern Territory estimates between 2010–11 and 2011–12 may in part be due to the inclusion of households in Very remote areas.
Data were self-reported for this indicator. The definition of 'urgent medical care' was left up to the respondent, although discretionary interviewer advice was that going to the GP for a medical certificate for work would not be considered urgent.
Method of collection: the data were collected by computer assisted telephone interview.
Data adjustments: data were weighted to represent the total in scope Australian population, and was adjusted to account for confidentiality and non-response.
Sample/collection size: the sample for the 2015–16 Patient Experience Survey was 28,276 fully-responding persons.
Response rate: response rate for the survey was 75%.
As data are drawn from a sample survey, the indicator is subject to sampling error, which occurs because a proportion of the population is used to produce estimates that represent the whole population. Rates should be considered with reference to their corresponding relative standard errors (RSEs) and 95% confidence intervals. Estimates with a relative standard error between 25% and 50% should be used with caution, and estimates with a relative standard error over 50% are considered too unreliable for general use.
This indicator generally has acceptable levels of sampling error and provides reliable data for most breakdowns. However, RSEs for the waiting time category '4 hours or more but within 24 hours' breakdowns are mostly greater than 25% and should either be used with caution or are considered too unreliable for general use. Similarly, data for the 'other' remoteness category has high RSEs when cross classified by state. Caution should be used when interpreting these data.
Known issues: data were self-reported and interpretation of urgent medical care was left up the respondent.
The data is self-reported but not attitudinal, as respondents are reporting their experiences of using the health system (in this instance, the time they waited between making an appointment for urgent medical care and the time they got to see the GP).
Explanatory footnotes are provided for each table.
Confidentiality: as in 2014–15 and 2013–14, the 2015–16 data have been perturbed. This has been footnoted in the tables. Perturbation is used to minimise the risk of identifying individuals in aggregated statistics. Perturbation involves small random adjustment of the statistics and is considered the most satisfactory technique for avoiding the release of identifiable statistics while maximising the range of information that can be released. These adjustments have a negligible impact on the underlying patter of the statistics.
After perturbation, a given published cell value will be consistent across all tables. However, adding up cell values to derive a total will not necessarily give the same result as published totals.
Consistency over time: 2009 was the first year data were collected for this indicator. Questions relating to this indicator were also asked in 2010–11, 2011–12, 2012–13, 2013–14, 2014–15 and 2015–16.
Time series issues: 2015–16 is comparable to 2014–15, 2013–14, 2012–13 and 2011–12, but not before this (i.e. 2014–15 is not comparable to 2010–11 or 2009). This has been footnoted in the relevant tables. The reason for the comparability issues stem from a significant change in question wording and coding methodology in the 2011–12 Patient Experience Survey for the ‘waiting times for GPs’ questions, and this has had an impact on the data.
Numerator/denominator: the numerator and denominator are directly comparable, one being a sub-population of the other.
The numerator and denominator are compiled from a single source.
Jurisdiction estimate calculation: jurisdiction estimates are calculated the same way, although the exclusion of discrete Indigenous communities in the sample will affect the Northern Territory more than it affects other jurisdictions.
Jurisdiction/Australia estimate calculation: all estimates are compiled the same way.
Collections across populations: data are collected the same way across all jurisdictions.
The Patient Experience Survey provides the only national data available for this indicator. At this stage, there are no other comparable data sources.
Due to differences in survey scope, collection methodology and question wording, these data are not comparable to data from the 2012–13 Australian Aboriginal and Torres Strait Islander Health Survey.
Source and reference attributes
ABS (Australian Bureau of Statistics) 2010. Health services: patient experiences in Australia, 2009. ABS cat.no. 4839.0.55.001. Viewed 21 June 2017, http://www.abs.gov.au/AUSSTATS/abs@.nsf/DetailsPage/4839.0.55.0012009
ABS 2011. Patient experiences in Australia: summary of findings 2010–11. ABS cat. no. 4839.0. Viewed 21 June 2017, http://www.abs.gov.au/AUSSTATS/abs@.nsf/allprimarymainfeatures/
ABS 2012. Patient experiences in Australia: summary of findings 2011–12. ABS cat. no. 4839.0. Viewed 21 June 2017, http://www.abs.gov.au/AUSSTATS/abs@.nsf/allprimarymainfeatures/
ABS 2013a. Patient experiences in Australia: summary of findings 2012–13. ABS cat. no. 4839.0. Viewed 21 June 2017, http://www.abs.gov.au/AUSSTATS/abs@.nsf/allprimarymainfeatures/
ABS 2013b. Census of population and housing: socio-economic indexes for areas (SEIFA), Australia, 2011. ABS cat. no. 2033.0.55.001. Viewed 21 June 2017, http://www.abs.gov.au/AUSSTATS/abs@.nsf/Lookup/2033.0.55.001
ABS 2014. Patient experiences in Australia: summary of findings 2013–14. ABS cat. no. 4839.0. Viewed 21 June 2017, http://www.abs.gov.au/AUSSTATS/abs@.nsf/allprimarymainfeatures/
ABS 2015. Patient experiences in Australia: summary of findings 2014–15. ABS cat. no. 4839.0. Viewed 21 June 2017, http://www.abs.gov.au/AUSSTATS/abs@.nsf/allprimarymainfeatures/
ABS 2016. Patient experiences in Australia: summary of findings 2015–16. ABS cat. no. 4839.0. Viewed 21 June 2017, http://www.abs.gov.au/AUSSTATS/abs@.nsf/Lookup/4839.0Main+
|Related metadata references:|
Supersedes National Healthcare Agreement: PI 12-Waiting times for GPs, 2016 QS Health, Superseded 31/01/2017
Has been superseded by National Healthcare Agreement: PI 12-Waiting times for GPs, 2018 QS Health, Standard 30/01/2018