National Indigenous Reform Agreement: PI 09Antenatal care, 2013
Identifying and definitional attributes  
Metadata item type:  Indicator 

Indicator type:  Indicator 
Short name:  PI 09Antenatal care, 2013 
METeOR identifier:  484317 
Registration status:  Indigenous, Archived 13/12/2013 
Description:  There are two measures for this indicator, both to be reported by Indigenous status: (1a): Number of women who gave birth, where an antenatal visit was reported in the first trimester, as a proportion of women who gave birth, and (1b): Number of women who gave birth, where five or more antenatal visits were reported, as a proportion of women who gave birth. 
Rationale:  The primary care needs of all Australians are met effectively through timely and quality care in the community. Good antenatal care is associated with positive health outcomes for mothers and babies. 
Indicator set:  National Indigenous Reform Agreement (2013) Indigenous, Archived 13/12/2013 
Outcome area:  Indigenous children are born and remain healthy Indigenous, Endorsed 21/07/2010 
Quality statement:  National Indigenous Reform Agreement: PI 09Antenatal care, 2013 QS Indigenous, Archived 25/06/2014 
Collection and usage attributes  
Computation description:  Crude rates are calculated for Indigenous Australians. Agestandardised rates are calculated for Indigenous and nonIndigenous Australians. Rate ratios and rate differences are calculated for Indigenous: nonIndigenous. For variability bands: Variability bands are to be calculated for rates using the standard method (see definition below). For trends: percentage change and statistical significance of change is to be calculated (required for CRC reporting). Presentation: Number, rate per 100 (percentage), rate ratios, rate differences and variability bands. First trimester is defined as before 14 weeks of pregnancy. Excludes Australian nonresidents of external territories and where the state/territory of residence was not stated. Excludes records with missing data for gestation at first antenatal visit. Definitions: Standard method for variability band computation: Rates derived from administrative data counts are not subject to sampling error but may still be subject to natural random variation, especially for small counts. A 95% confidence interval for an estimate is a range of values which is very likely (95 times out of 100) to contain the true unknown value. Where the 95% confidence intervals of two estimates do not overlap it can be concluded that there is a statistically significant difference between the two estimates. This is the standard method used in AIHW publications for which formulas can be sourced from Breslow and Day (1987) in the publication ‘Statistical methods in cancer research’. Typically in the standard method, the observed rate is assumed to have natural variability in the numerator count (e.g. deaths, hospital visits) but not in the population denominator count. Also, the rate is assumed to have been generated from a Normal distribution ("Bell curve"). Random variation in the numerator count is assumed to be centred around the true value, i.e. there is no systematic bias. 
Computation:  Crude rate: 100 x (Numerator ÷ Denominator). Agestandardised rate: calculated using the direct method, using five year age groups from 1519 years to 4044 years using the Australian female population who gave birth in the current reporting period as the standard. Agestandardisation should be done in accordance with the NIRAPIMG agreed principles for direct agestandardisation (see Comments section. Note that Principle 1 and Principle 4 are not applicable for this indicator). Rate ratio: Indigenous rate divided by nonIndigenous rate. Rate difference: Indigenous rate minus nonIndigenous rate. Variability band: to be calculated using the standard method for estimating 95% confidence intervals as follows: Crude rate: Where p = crude rate for either Measure 1a or Measure 1b q = 1p n = crude rate denominator for either Measure 1a or Measure 1b. Agestandardised rate: Where w_{i} = the proportion of the standard population in age group i d_{i} = the numerator for either Measure 1a or Measure 1b in age group i n_{i} = the denominator for either Measure 1a or Measure 1b respectively (see Denominator below) in the population in age group i Percentage change: Calculated by multiplying the average annual change over the period by the number of data points less 1. This is then divided by the rate for the first year in the series and multiplied by 100. The average annual change in rates, rate ratios and rate differences are calculated using linear regression which uses the least squares method to calculate a straight line that best fits the data and returns an array that best describes the line. The simple linear regression line, Y = a + bX, or ‘slope’ estimate was used to determine the average annual change in the data over the period. The formula used to calculate the slope estimate and standard error of the slope in Microsoft Excel is: LINEST (known_y’s, known_x’s, true) entered as an array formula (Ctrl, Shift, Enter). Statistical significance of change: The 95% confidence intervals (CIs) for the standard error of the slope estimate (average annual change) are used to determine whether the apparent increases or decreases in the data are statistically significant at the p<0.05 level. The formula used to calculate the CIs for the standard error of the slope estimate is: 95% CI(x) = x ± 1.96 x SE(x) where x is the average annual change (slope estimate). If the upper and lower 95% confidence intervals do not include zero, then it can be concluded that there is statistical evidence of an increasing or decreasing trend in the data over the study period.

Numerator:  Measure (1a): number of women who gave birth where an antenatal visit was reported in the first trimester (up to and including 13 completed weeks), for at least one live or stillborn baby. Measure (1b): number of women who gave birth where five or more antenatal visits were reported for pregnancy of 32 or more weeks gestation, for at least one live or stillborn baby. 
Numerator data elements:  
Denominator:  Measure (1a): total number of women who gave birth, for at least one live or stillborn baby (where gestation at first antenatal visit is known). Measure (1b): total number of women who gave birth at 32 weeks or more gestation, for at least one live or stillborn baby (where number of antenatal visits is known). 
Denominator data elements:  
Disaggregation:  Current period (2010): For Indigenous only (numbers and crude rates):
Time series – 2007, 2008, 2009 (previously supplied data), 2010 (required for 2013 reporting): For Indigenous and nonIndigenous (numbers, agestandardised rates, rate ratio, rate difference, percentage change, variability bands and statistical significance of change):

Disaggregation data elements:  
Comments:  Most recent data available for 2013 CRC report is 2010. There are were no data elements in the Perinatal national minimum data set (NMDS) for antenatal care prior to July 2010, however some information is obtained as part of the National Perinatal Data Collection (NPDC). Information is included in the NPDC and the Perinatal NMDS for all live births and still births of at least 400 grams birthweight or at least 20 weeks gestation. Data on gestation at first visit (1a) are only available to report for NSW, Qld, WA, SA, ACT and NT for births from January 2010, and for Victoria and Tasmania for births from 1 July 2010; and data on number of antenatal visits (1b) are only available to report for Qld, SA and NT for 2013 reporting. Analysis by state/territory is based on usual residence of the mother. Comparability between data currently collected for births before July 2010 may be limited by different definitions of first antenatal visit. Maternal age is the age at the time of giving birth. To report trends, the COAG Reform Council will separately request percentage change and statistical significance testing for this indicator directly from the data provider (AIHW). Variability bands accompanying perinatal data should be used for the purposes of comparisons over time and for national estimates at a point in time for Indigenous/nonIndigenous comparisons. Baseline year for NIRA target (Halve the child mortality gap within a decade) is 2008; baseline year for this indicator is 2008; target year is 2018. NIRAPIMG agreed Principles for reporting directly agestandardised rates for administrative data Overarching principle: Before undertaking agestandardisation, analysts must investigate the data being used to understand the agespecific distribution and any limitations that may impact on the results. Principle 1: The standard population used should be the Australian Estimated Resident Population as at 30 June 2001 from the 2001 Census until population estimates from the 2011 Census become available. The population used as the denominator for the calculation of Indigenous agestandardised rates should be SERIES B of Indigenous experimental estimates and projections 2006 to 2021 based on the 2006 Census until population estimates from the 2011 Census become available. Principle 2: If the denominator is less than 30 in any one age group, then do not attempt to produce agestandardised rates. Agegroups may be collapsed to obtain a denominator of 30 or more (provided that this is in accordance with principle 3 and 4). Principle 3: If the total number of Indigenous events (e.g. deaths, hospital separations) is less than 20, then do not attempt to produce agestandardised rates. Combining several years of data, or aggregating jurisdictions should be considered to obtain a total of 20 or more events. If this does not meet the purpose (i.e. data are required for time series or jurisdictional comparisons), or does not result in greater than 20 events in total, then other measures and contextual information should be reported instead of agestandardised rates which could include total number of events, crude rates, agespecific rates, agespecific rate ratios and median age at death. Principle 4: Agestandardised rates should be calculated using the five year age groupings of 04 years to 75 years and over (provided Principles 2 and 3 for denominator and numerator are met). 10year age groups may be used to overcome small numbers (20 year age groups are too wide and should not be used). Principle 5: Additional contextual information (most importantly agespecific rates and ratios) should be provided in addition to agestandardised rates when: a) the agestandardised rates and rate ratios lie largely outside the range of the agespecific rates and rate ratios. b) the pattern of agespecific rates of the Indigenous and nonIndigenous populations differ substantially (e.g. deaths from a certain cause concentrate on younger ages for Indigenous population while for nonIndigenous they may occur at older ages). c) the agespecific rates depart from the assumption of a uniform increase in death with age (e.g. injury which peaks in the young adult to middleages and certain cancers amenable to treatment for some age groups). d) the condition of interest is largely confined to a specific age range (e.g. sexually transmitted infections (STIs) and women who give birth). In such instances, agestandardisation could be restricted to include the age groups within this age range only. Principle 6: For conditions restricted to a specific age group (e.g. conditions originating in the perinatal period and sudden infant death syndrome (SIDS)), it is recommended to report the agespecific rate for the agegroup of interest instead of the agestandardised rate. 
Representational attributes  
Representation class:  Percentage 
Data type:  Real 
Unit of measure:  Person 
Format:  NN[N].N 
Indicator conceptual framework  
Framework and dimensions:  Effective/Appropriate/Efficient 
Data source attributes  
Data sources:  
Accountability attributes  
Reporting requirements:  National Indigenous Reform Agreement. 
Organisation responsible for providing data:  Australian Institute of Health and Welfare. 
Further data development / collection required:  Specification: Interim, pending the development and implementation of standard data definitions. A standard data item for gestation at first presentation for antenatal care has been developed and included in the Perinatal NMDS from 1 July 2010. A standard data items for number of antenatal visits has been developed and included in the Perinatal NMDS from 1 July 2013. 
Source and reference attributes  
Steward:  National Indigenous Reform Agreement Performance Information Management Group 
Relational attributes  
Related metadata references:  See also National Healthcare Agreement: PI 33Women with at least one antenatal visit in the first trimester of pregnancy, 2012 Health, Retired 25/06/2013 Has been superseded by National Indigenous Reform Agreement: PI 09Antenatal care, 2014 Indigenous, Archived 24/11/2014 Supersedes National Indigenous Reform Agreement: PI 14Antenatal care, 2012 Indigenous, Archived 13/06/2013 
 My items contains 0 items
 Add item to My items
 Clear all items from My items
 Manage My items
 Download metadata item as Word™ or PDF
 Advanced options